|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Click Here & Upgrade PDF Complete Documents Expanded Features Unlimited Pages SPICE Device Model SI4894DY Vishay Siliconix N-Channel 30-V (D-S) MOSFET CHARACTERISTICS * N-Channel Vertical DMOS * Macro Model (Subcircuit Model) * Level 3 MOS * Apply for both Linear and Switching Application * Accurate over the -55 to 125C Temperature Range * Model the Gate Charge, Transient, and Diode Reverse Recovery Characteristics DESCRIPTION The attached spice model describes the typical electrical characteristics of the n-channel vertical DMOS. The subcircuit model is extracted and optimized over the -55 to 125C temperature ranges under the pulsed 0 to 5V gate drive. The saturated output impedance is best fit at the gate bias near the threshold voltage. A novel gate-to-drain feedback capacitance network is used to model the gate charge characteristics while avoiding convergence difficulties of the switched Cgd model. All model parameter values are optimized to provide a best fit to the measured electrical data and are not intended as an exact physical interpretation of the device. SUBCIRCUIT MODEL SCHEMATIC This document is intended as a SPICE modeling guideline and does not constitute a commercial product data sheet. Designers should refer to the appropriate data sheet of the same number for guaranteed specification limits. Document Number: 71598 17-May-04 www.vishay.com 1 Click Here & Upgrade PDF Complete SPICE Device Model SI4894DY Vishay Siliconix Documents Parameter Static Gate Threshold Voltage On-State Drain Current a Expanded Features Unlimited Pages SPECIFICATIONS (TJ = 25C UNLESS OTHERWISE NOTED) Symbol Test Conditions VDS = VGS, ID = 250 A VDS 5 V, VGS = 10 V VGS = 10 V, ID = 12.5 A VGS = 4.5 V, ID = 10.2 A Forward Transconductance Diode Forward Voltage a a Typical Unit VGS(th) ID(on) a 1.25 398 0.010 0.015 31 0.70 V A S V Drain-Source On-State Resistance rDS(on) gfs VSD VDS = 15 V, ID = 12.5 A IS = 2.7 A, VGS = 0 V Dynamicb Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Source-Drain Reverse Recovery Time Notes a. Pulse test; pulse width 300 s, duty cycle 2%. b. Guaranteed by design, not subject to production testing. Qg Qgs Qgd td(on) tr td(off) tf trr IF = 2.7 A, di/dt = 100 A/s VDD = 15 V, RL = 15 ID 1 A, VGEN = 10 V, RG = 6 VDS = 15 V, VGS = 10 V, ID = 12.5 A 19.2 3 4.5 10 15 22 40 30 ns nC www.vishay.com 2 Document Number: 71598 17-May-04 Click Here & Upgrade PDF Complete Documents Expanded Features Unlimited Pages SPICE Device Model SI4894DY Vishay Siliconix COMPARISON OF MODEL WITH MEASURED DATA (TJ=25C UNLESS OTHERWISE NOTED) Document Number: 71598 17-May-04 www.vishay.com 3 |
Price & Availability of SI4894DY |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |